Changing Pickups

[UnderMyDreams]

I'm putting a seymour duncan invader into my strat, the diagram on the website says it should be wired like this:
http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2 t_5w

Anyways, I can't tell if the wire that goes from the pickup to the volume is the white one or if it is the bare wire.

Anyone help? lol

[patrickhowell]

it looks like this should be what you need:

http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=hum_sing_s ing_1vol_1tone_5w

ALSO, you should rewire it so you can split the coils on the invader... it sounds awesome as a single coil. It's like a tele, but not quite as much bite.

Actually, I've got a really good idea. Hook it up like that diagram, and use your second tone control as a blended coil split: http://www.seymourduncan.com/support/schematics/schematics.php?schematic=sum96tip

Does that make sense ?

[UnderMyDreams]

yea, thanks!

I figured out the diagram... I don't think i'm going to do the blended coil thing... I really don't want to hassle with rewiring more than I really need to haha.

[patrickhowell]

I really think you should go for it... It would definitely be worth a few extra minutes to have it.

[UnderMyDreams]

Alright, thanks.

By the way, I was at your show last night. Good job haha.

[patrickhowell]

Thanks dude ! Definitely come hang out next time we're in the area... Should be the first weekend of May with Sam's band, Okay Break!

[UnderMyDreams]

I was the one who's car jared jumped haha. But I would, but I'll be at college. This week was spring break so i was able to get out there with Mike and Sam. Next time for sure though!